Phone: +91 9821786861 / +91 9820588276
info@sealventuresindia.com / sealventuresindia@gmail.com
An Agitator seal is a device used to effect a seal between a rotating or reciprocating part and a stationary part on an Agitator / Mixer / Vessel. A mechanical seal works by creating a restrictive flow path, this is either an axial or radial gap.
Bellows Mechanical Seals can eliminate O-rings to increase compatibility and reduce potential leak paths. The metal bellows design allows for higher flow rates and less clogging than traditional spring seals.
Mechanical seals are devices that are used to provide a seal at the point of entry or exit of a rotating shaft. Typically it is used to prevent the leakage of one high pressure fluid into a lower pressure fluid.
Mechanical shaft seals are devices that are used to provide a seal at the point of entry or exit of a rotating shaft. Typically it is used to prevent the leakage of one high pressure fluid into a lower pressure fluid.
The Metal Bellow Seals are widely used in high temperature and highly corrosive media. These seals are used for eliminating elastomers because of temperature limits. All elastomers have both an upper and lower temperature limit that prevents them from sealing many hot resins, polymers and cryogenic applications.
Multiple spring seals are designed so that an even face load is applied over the face area but a number of compression springs. This results in higher pressure sealing capabilities.
Oil seals are used to protect shafts and bearings from ingress of dirt and foreign matter and egress of oil or grease. An oil seal generally consists of an outer circular metal part and an inner flexible member that does the actual sealing and is bonded to the metal part by chemical adhesive agents.
The seal faces are pushed together using a combination of hydraulic force from the sealed fluid and spring force from the seal design. In this way a seal is formed to prevent process leaking between the rotating (shaft) and stationary areas of the pump.
Rubber bellow mechanical seal developed with rubber bellow are mainly used for water, oils and light duties applications. The rubber bellow seal is single acting and independent of direction of rotation.
A cartridge seal is typically an enclosed type of seal system that has preassembled components. In a pre-assembly, you have a gland, sleeve, and other hardware components. The design prevents the entry of dirt inside the seal faces.
Wave springs are ideal for pumping viscous liquids in the food, dairy, brewery, petrochemical and pharmaceutical industries. Other applications include pulp & paper, chemical and purification plants.
At Sealventures India Private Limited, we maintain quality management system with strong emphasis on the continuous improvement quality, engineering, manufacturing & business process.